Rust converter “Anticor” ZEBRA
1-1,5 hour at +18-22°С and 65% RH
Type of works
• Turns rust into a reliable sheeting
• Free of solvents and toxic substances
• Does not require rinsing with water
Appointment: For anticorrosion protection and restoration against corrosion of ferrous metal surfaces, fittings, metal building structures, car bodies, roofs, fences, bridges, industrial equipment, internal and external surfaces of pipelines, drinking water tanks and the like.
Surface preparation: Pre-clean the surface of dirt, grease, old paint and unstable rust with a scraper, wire brush or special nozzles and, if necessary, degrease with Zebra TM solvent.
Method of application: Mix thoroughly. To apply the converter with a brush, roller, sponge or spray gun in a continuous uniform layer avoiding excess. It is advisable to filter the precipitate before spraying. The optimum application temperature is from +15 to +20 OS. Do not cover surfaces heated above 40C and cooled below 0C. Does not require rinsing with water after application and conversion. When the thickness of the rust layer is more than 150 microns, individual rust points may remain, the processing process must be repeated. After drying, the dusty transformation products should be removed from the surface with a dry brush or rag. Primer and painting is best done immediately after the converter dries (no later than 1-2 days). During this period, the treated surface should be protected from moisture.