Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Moisture resistant putty TR-12 power TRIORA prof

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      4-12 hours at +18-22°С and 65% RH

    • Coverage

      1,6 kg/m² for 1 mm layer thickness

    • Thinner

      Water

    • Type of works

      Inside and outside the permises

    • Containers

      0,8 kg, 1,5 kg, 5 kg, 16 kg

    • Drying time

      24 months

The value of the product:

  • Could be applied to the surface with the layer thickness up to 5 mm
  • Ideal for creating structures on the surface
  • Micronized marble – high strength coating
  • High moisture resistance – ideal for wet rooms
  • Excellent for facade work

The appointment of the product:

Using for finishing and repair work in order to equalize roughness and defects up to 5 mm before applying the finish coat inside and outside the house. Recommended for using in the wet rooms

The mode of application:
Surface preparation:

  • The surface must be clean, dry, strong and free from grease
  • The surfaces previously coated with chalk, glue, lime or silicone paints, must be cleaned from the old coating completely
  • Mold or fungus must be removed with the help of the Biosecurity Agent TR-25 bio TM TRIORA prof
  • For high-quality preparation of the surface it have to be primed, with TR-23 strong primer with the deep penetration by TM TRIORA prof diluted with water (1: 1)
  • Intensively absorbing surfaces (aerated concrete, gypsum), as well as surfaces that crumble, should be primed with TR-23 strong primer with the deep penetration by TM TRIORA prof

Application:

  • The putty must be mixed before applying
  • Now putty is ready for using
  • Must be applied with the help of a spatula or spray with the layer thickness up to 5 mm
  • Before final finishing, the surface must be sanded with the fine sanding pad and then primed in 1 coat. The dust must be removed from the surface to improve the adhesion of the following material

Instruments: Spatula or spray

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

; preloader