Acrylic putty for wood TRIORA
Save the link in your social network that would not lose.
Write expert
-
Drying time
4-24 hours at +18-22 °С and 65% RH
-
Coverage
1,6 kg/m² for 1 mm layer thickness
-
Thinner
Water
-
Type of works
Interior, Exterior
-
Containers
0,4 kg, 0,8 kg
-
Drying time
24 months
-
Colour scale
White, Wood shades
Value of the product:
- Easy to apply
- High adhesion
- Forms a solid coloured surface
- Easy to polish
- Vapour-permeable
The color palette:
Recommended uses:
For exterior and interior levelling of defects of wooden surfaces
Application guidelines:
Surface preparation:
- Remove dust, dirt, peeling paint
- The treated surface must be dry, with less than 20% wood humidity
- Raw wood must be treated with wood protective primer ANTISEPTIC GRUND TRIORA
Dilution:
No dilution needed. May be diluted with water up to 5%
Application guidelines:
- Thoroughly stir before applying
- The putty is to be applied with a putty knife with the layer thickness of up to 1 mm. If there are major defects, apply several layers. Each next layer is to be applied only after the previous one has dried
- Before painting, polish the surface of the putty
- Apply with a stainless putty knife at temperature above +10°C
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.