Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Priming paint for plaster «FIJI» TRIORA active

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      1-2 hour at +18-22°С and 65% RH

    • Coverage

      1L per 4-6 m²

    • Thinner


    • Type of works

      Interior, Exterior

    • Containers

      1 L, 3 L, 10 L

    • Drying time

      24 months

    • Colour scale

      White, Tinting in tinting studios

Value of the product:

  • Universal contact primer for acrylic and silicone plasters for structural paints
  • It contains quartz filler
  • High adhesion to the surface
  • It is convenient to work as a roller and brush
  • You can use a “decorations” to create a rough layer
  • Toning
  • Suitable for preservation of objects in the off-season

Recommended uses:
To be applied to concrete, plaster, cement-lime, cement, sand, brick, plasterboard, and the surface previously painted water-dispersion paints, creates a rough surface for better grip with the subsequent material (plaster, putty, structural paint, etc.)

Application guidelines:
Surface preparation:

Application guidelines:

  • Before use, mix thoroughly
  • Applied undiluted or diluted with water if necessary to a viscosity (not more than 5%)
  • Apply in 1 coat
  • Precautionary measures

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader