Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Facade texturing paint «INDIA» TRIORA active

Скачать санитарно-гигиеническое заключение
Write expert
    • Drying time

      4-6 hours at a temperature +18-22°С and 65% RH

    • Coverage

      up to 1.2 m²/kg (up to 20 m²) for roller appyling, nearly 0.6 m²/kg (9-10 m²) for putty knife applying or decorative texturing

    • Thinner

      Water

    • Type of works

      Interior, Exterior

    • Containers

      5 kg, 15 kg

    • Drying time

      24 months

    • Colour scale

      White, Tinting in tinting studios

Value of the product:

  • Optimal for creating structural facade
  • It forms a characteristic homogeneous rough surface with a roller
  • It forms a weatherproof, water-resistant coating resistant to mechanical stress
  • Contains wax – it creates on the surface of the “lotus effect”
  • It has a high adhesion to the surface
  • It differs good vapor permeability
  • Easy to apply and structured
  • Resistant to microcracks

Recommended uses:
For the protection and decoration of surfaces with high operational load on the front and inside buildings, as well as use as a final layer of thermal insulation system using polystyrene plates

Composition:
Surface preparation:

  • Surfaces must be clean, dry, sound and free of grease
  • The substrate must not have cavities and recesses greater than 2 mm
  • Be sure to put on the surface of the ground-contact FIJI TM TRIORA astive tinted to the paint colour

Dilution:
If necessary, dilute with water for working viscosity (not more than 1%)

Application guidelines: 

  • Before applying structural paint must be thoroughly mixed
  • Apply with a spatula or brush onto the prepared surface and then structure the rougher roll
  • Dried paint structure may only be mechanically removed by polishing

Tools: Texturing rollers, decorating tools

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

preloader