Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Liquid glass Malva

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Thinner


    • Type of works

      Interior, Exterior

    • Containers

      1,3 kg, 2,5 kg, 7 kg

    • Drying time

      12 months

Value of the product:

  • For flame-retardant treatment as a grout component, for preparation of special (heat-resistant and acid-resistant, acid-proof mortars)
  • Non-explosive
  • For waterproofing of wells
  • For filling cracks and cavities in walls and ceilings
  • For priming of screed surface
  • Non-flammable, odourless
  • Transportation and storage at temperatures below 0°C are allowed

Recommended Uses:
Used for filling cracks and cavities in walls and ceilings; for priming of screed surface; for waterproofing of wells; for flame-retardant treatment; for preparation of acid-proof mortars

Composition: Sodium liquid glass

Application Guidelines:
Surface preparation:

  • The surface should be dry, degreased and free of dust

Application Guidelines:

  • For filling cracks and cavities in ceilings and walls, prepare mixture of the liquid glass, cement and sand with 1:1:3 ratio. Firstly, prepare mixture of cement and sand, with the volume of water equalling the volume of the liquid glass. Add this mixture to the liquid glass, continuously stirring
  • For priming of screed surface, prepare mixture of the liquid glass, cement and sand with 1:1 ratio. Mix cement with water (the weight of water shall not exceed 25 % of the weight of the liquid glass). Add this mixture into the liquid glass by portions, continuously stirring
  • For waterproofing of wells, prepare mixture of the liquid glass, cement and sifted fine sand with 1:1:1 ratio according to p.1, apply this mixture to the walls of the well, then treat with the liquid glass
  • For preparing waterproof plaster and flame-retardant mortar. Prepare mixture (the liquid glass, cement and sand with 1:1:2.27 ratio), add water to obtain working viscosity (hardening time is 10 min), apply to the surface

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader