Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Glue for foamed polystyrene MIXOR

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      24 hours a temperature +20°С and 65% RH

    • Coverage

      120 г/m²

    • Thinner


    • Type of works

      Inside and outside the permises

    • Containers

      1 kg

    • Drying time

      18 months

The value of the product:

  • Excellent adhesion
  • Without slipping
  • It does not require shuttering before gluing

The appointment of the product:
For gluing decorative elements, moldings, baguettes, ceiling insulating boards from the compacted foamed and extruded foamed, materials on fibrous-synthetic base, radiator screens to the wooden, plaster, mineral surfaces, fiberboard, and particleboard. It is possible to apply decorative elements from foam polystyrene for gluing with the use of additional fasteners. For dry rooms and rooms with high humidity

Application Guidelines:
Surface preparation:

  • Use at temperatures at least + 5°C
  • The application of glue can be carried out in two ways: spot plating and pasting all over the surface
  • Working time (the time the stuck material can be moved or displaced) up to 50 minutes depending on the temperature and absorbing ability of the surface
  • Excess glue should be removed with the help of the damp sponge
  • Work tools should be washed with water

Solvent: Water

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader