Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Glue for polystyrene Grizzly

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      24 hours at a temperature 18-20°С

    • Coverage

      from 120 ml/m²

    • Thinner


    • Type of works


    • Containers

      280 ml

    • Drying time

      18 months

The value of the product:

  • No slipping
  • High strength
  • Fast fixation

For gluing decorative elements, moldings, baguettes, ceiling and isolation plates made of firm foamed and extruded foam, materials on a fiber-synthetic basis, radiator screens on wooden, gypsum, mineral surfaces, fiberboard, chipboard. Can be used for gluing decorative elements from polyurethane foam using additional fasteners. For dry rooms and rooms with high humidity

Method of application:

  • Use at a temperature of at least +5 ° C
  • Application of the glue can be completed in two ways: tipping-on and gluing over the entire surface
  • The working time (the time during which the glued material can be moved, displaced) to 50 minutes, depending on the temperature and the absorbing capacity of the surface
  • The glue for polystyrene does not need to be soaked before gluing
  • Excess of the glue should be removed with a damp sponge
  • After work, clean tools with the help of water

Consumption: From 120 ml / m2 (depending on the size and weight of the bonded material, and the method of application)

Drying time: 24 hours at a temperature from 18 to 20 ° C

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader