Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Glue for non-woven wallpapers Grizzly

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      24 hours to full drying

    • Coverage

      1 pack per 8-10 rolls

    • Thinner


    • Type of works


    • Containers

      0,25 kg

The value of the product:

  • High adhesive capacity
  • Easy application directly to the wall with the help of roller or brush
  • Does not form lumps
  • Convenient gluing, possibility of joint correction
  • The wallpaper can be removed easily during subsequent repairs
  • Possibility of storing the premix for up to 8 days in a closed container

Glue is used for gluing of non-woven wallpaper of any type: on non-woven basis, heavy vinyl wallpaper for painting and non-painting wallpaper

Surface preparation:

  • The surface must be clean, dry and free of grease
  • Remains of old wallpaper must be removed
  • Previously painted surfaces should be sanded with sandpaper
  • Intensively absorbing surfaces must be primed with an acrylic primer or diluted glue first and then allowed to dry
  • After that, apply glue to the wallpaper, prepared according to the proportions indicated in the table.

Mode of application:

  • Pour room temperature water in a clean container in the amount indicated in the table
  • Gradually pour out the contents of the packet with constant stirring
  • Wait 10 minutes before thickening. Stir vigorously until smooth
Assignment Water, liters/packet Number of rolls* Square, m²
non-woven wallpapers 6 8-10 50
non-woven wallpapers for painting 5 8 55

* Standard wallpaper roll 10,05 m х 0,53 m

Gluing the wallpaper:

  • Cut a wallpaper roll into sheets equal to the height of the wall +10 cm, if necessary, taking into account the features of the picture
  • Apply glue on the back of the wallpaper with a uniform layer, carefully blurring the edges
  • Bend the edges to the middle of the glued side
  • Give the glue some time to soak
  • The time depends on the type of wallpaper (follow the instructions of the wallpaper manufacturer)
  • The first cloth is glued strictly vertically (by plumb line), starting from the top of the wall and retreating 40 cm from the corner of the room or window
  • The pasted sheet is smoothed with a dry cloth, brush or spatula from the center to the edges, removing air bubbles
  • The next sheet is glued to the back with the previous one
  • From below, the wallpaper is cut off with a wallpaper knife and a ruler


  • Work at a temperature from +10 ° C to +35 ° C and humidity of 60 ± 5%
  • During the gluing of the wallpaper and until it dries completely, keep the windows and doors indoors closed

Tools: Brush, roller

Solvent: Water

Note: The minimum temperature for gluing is + 5 ° C, the optimum temperature is 18-20 ° C and the atmosphere relative humidity is 65%

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader