BUSTILAT-3 glue Malva
24 hours; up to complete curing – 72 hours;
Type of works
1,3 kg, 2,5 kg
The glue is used for wood, felt- and fabric- supported linoleum, ceramic tile, paper
- The surfaces to be bonded should be dry, free of dust, grease, oil, old coatings, etc
- Stir the glue before applying. Apply the glue to one of the surfaces with a putty knife, expose for 3-5 minutes, then press tightly two surfaces together
- The glue layer of not more than 1 mm is recommended. Excessive glue after joining the surfaces must be removed with damp cloth
- Before bonding linoleum, it should be flattened and lie for a while, then pressed tightly in order to avoid the formation of air bubbles
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.