Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Water-dispersive primer Magnum 011

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      1 hour at +18-22°С and 65% RH

    • Coverage

      10,2 m²/kg or 12,7 m²/L

    • Type of works

      Inside and outside the permises

    • Glossiness

      Matte

    • Containers

      20 kg, 50 kg

    • Drying time

      12 months

Product Value:
Water-dispersive fast-drying single-component primer with high adhesion to metal

Purpose:
“MAGNUM 011” primer is intended for corrosion protection of clean metal surfaces. It is used as an intermediate coating in coating systems with various types of paints or as an independent coating for conservation protection for the time of production, storage, transportation of rolled metal and metal structures (by type of weld-through primer)

Mode of application:
Surface preparation:

  • The primed surface must be cleaned from oil, grease, dirt and poorly adhering rolling scale, rust, paint and foreign particles to the degree of cleaning of Sa2 in accordance with International Standard ISO 8501-1: 2007
  • The permitted degree of surface cleaning with a manual or mechanized tool is St2, for cleaning small (local) areas;
  • Surface cleanliness is monitored in accordance with ISO 8502;
  • The surface degreased with water-based technical detergents followed by water rinsing.

Application:

  • The primer should be thoroughly mixed until indiscrete mass before application;
  • Dilution of the primer is not required;
  • If necessary, the primer is diluted with water;
  • It is recommended to use purified water for dilution;
  • The primer is applied at environmental temperature of at least + 10°C and a relative air humidity of not more than 85%;
  • The temperature of the surface to be painted must be at least 3°C higher than the dew point;
  • In the paint zone, good air circulation should be ensured;
  • The surface to be painted must be protected from precipitation.

Storage and packaging:
Store in a cool dry place with good ventilation. Smoking an open flame using in areas of painting are not allowed.

Precautionary measures:
Minimum safety precautions for priming:
– Avoid eyes and skin contact with the primer. To protect the eyes and skin, use protective clothing, gloves, goggles, masks, etc.
– Ensure necessary ventilation for painting works areas;
– In case of contact with skin, immediately remove contaminated clothing and thoroughly wash skin with soap and water or use special skin cleaners. Solvents and thinners of paints should not be used. In case of primer contact with the eyes, rinse thoroughly with clean running water for 10 minutes, pushing the eyelids apart. Seek medical help immediately.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

preloader