Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Waterproofing primer TRIORA

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      4-8 hours at a temperature +18-22 °С and 65% RH

    • Coverage

      1L per 5–10 m²

    • Thinner


    • Type of works

      Interior, Exterior

    • Containers

      5 L, 10 L

    • Drying time

      24 months

Value of the product

  • Ideal for humid, damp premises subject to long-term water exposure (swimming-pools, shower rooms and bathrooms)
  • High water resistance
  • 1st layer for high-quality waterproofing
  • Forms a durable elastic alkali-resistant layer—can be applied on wet plasters
  • Extends operational life of the coating
  • For exterior and interior use
  • Can be used as an additive to cement grouts

Recommended uses:
For reinforcement and waterproofing of interior and exterior surfaces. For pre-treatment of concrete, asbestos-cement, brick, slate, plastered and other porous surfaces subject to long-term water exposure (swimming-pools, shower rooms and bathrooms)

Water-based acrylic dispersion supplemented by various auxiliary materials

Application guidelines:
Surface preparation

  • Remove old peeling coating before work
  • The surface to be treated must be dry, degreased and free of dust


  • For the surfaces plentifully absorbing moisture or those under continuous exposure of water, it is recommended to apply the primer diluted with water in 1:1 ratio as the first layer
  • The undiluted primer shall be applied as the second layer after drying of the first one

Application guidelines

  • Thoroughly stir the primer before applying
  • Apply 1-2 layers with a brush, roller or by spraying at temperature +5 °С and above
  • The second layer is to be applied after the first one has dried

Attention: avoid overpriming – the surface should not be glossy!

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners





Supplier Data

  • Section


; preloader