Value of the product:

• Ready-made water-based product
• Active substances of the product penetrate deeply into the surface, clearing it of fungi and mould
• For interior and exterior use

Recommended uses:
To remove fungi, mould, moss, algae from interior and exterior plastered, stone and concrete surfaces

Composition:

• Suspension of pigments and fillers in water-based acrylic dispersion supplemented by various auxiliary materials

Application guidelines:
Surface preparation:
The surface infected with microorganisms must be cleaned by exterior action and washed out with water

Dilution:
No dilution needed. Ready to use

Application guidelines: 

• Apply a thin uniform layer of the product with a brush on the prepared dry surface
• Further treatment of the surface must be performed only after full drying of the bioprotective agent
• Work at temperature +5°С-+35°С

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.