Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Primer enamel 2 in 1 in spray can MALVA

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      «To tear» – 30 minutes, complete drying 2 hours at a temperature 20±2°С and 65% RH

    • Coverage

      1,5-2 m² depending on layer thickness and enamel color

    • Type of works

      Inside and outside the permises

    • Glossiness

      Semi-matte

    • Containers

      400 ml

    • Washing resistance

      Washing-resistant

    • Drying time

      36 months

Product Value:

  • Weatherproof
  • Does not require priming
  • Protects the surface from corrosion

Colour Range:

Эмаль-грунт 2 в 1 в аэрозольной упаковке Мальва

Purpose:
Enamel for different types of surfaces (metal, concrete, gypsum board, wooden, glass, paper, etc.) painting, both inside and outside the premises. Ideal for working with stencils

Mode of application:
Surface preparation

  • It is necessary to prepare the surface to be painted: get rid of old coverings, grind and degrease
  • To mix the contents of the can shake it at least 3 minutes. This can help you to get uniform coating
  • In the process of work, it is necessary to shake the can periodically
  • Test the spray
  • The can should be kept upright during painting. Primer enamel must be applied with a thin layer. The distance between the surface to be painted and can spray must be about 25-30 cm
  • To achieve the best result it is better to apply primer enamel in 2-3 layers. The drying time of the first layer is 5-10 minutes, each next 10-15 minutes
  • It is recommended to apply lacquer as a finish layer to obtain reliable protection and maximum gloss. The lacquer must be applied 30 minutes after the last enamel layer application
  • In case of incomplete using of the priming enamel, turn the cylinder downward and spray until it discolored completely. This prevents the drying of the priming enamel in the can and allows using of primer enamel in the future

Storage, transportation and disposal conditions:
The can is under pressure. Store out of direct sunlight. Do not use or store a paint can at temperatures above 50°C. Disposal of the can and its contents is carried out in a special area for the destruction of hazardous waste.

Precautionary measures:
Do not use near naked flames or incandescent material. Do not break, pierce or burn the used can. Use aerosol in well-ventilated areas. Use personal respiratory protection and eye protection. Wear gloves and do not allow skin contact. If ingested obtain medical attention immediately. Keep away from children.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

; preloader