Alkyd Enamel PF-116 ZEBRA
-
Drying time
24 hours at +18-22°С and 65% RH
-
Coverage
80-180 gr/m²
-
Тhinner
White spirit, solvent or their mix in 1:1 ratio
-
Type of works
Interior, Exterior
-
Glossiness
Glossy
-
Containers
0,25 kg, 0,9 kg, 2,8 kg, 12 kg, 50 kg
-
Washing resistance
Washing-resistant
-
Drying time
24 months
-
Colour scale
White, Stock-produced colours
Value of the Product:
- Life time 5 YEARS
- Weather-resistant
- High gloss level
- Increased coverage
- Efficient consumption
- Bright, rich colours
- High durability of the coating
- Good adhesion
Colour Range:
Recommended Uses:
Designed for exterior and interior use. Used for painting metal (except for galvanized surfaces, non-ferrous metals and stainless steel), wooden and other surfaces
Application Guidelines:
Surface preparation:
- The surface to be painted must be dry and free of dust, rust, grease, oils, scale, etc
- Old peeling paint-and-lacquer coatings must be removed
- To reduce painting cost and extend operational life, carry out pre-coating of the surface with ZEBRA Primer GF-021 or PF-010M
Dilution:
- If necessary, dilute with an appropriate solvent to working viscosity
- Dilution with solvents other than the ones approved herewith and mixing with other paint-and-lacquer materials are not allowed
Application Guidelines:
- Stir thoroughly
- Apply the enamel by spraying, with a brush or a roller
Storage, transportation and disposal:
Keep out of children’s reach.Store and transport in a tightly closed original container protected from moisture and direct sunlight. Not afraid of frost. Closed container with the remains of the product should be disposed in the special organized places for collecting of household waste. Keep away from fire.