Value of the product:

• Resistant to high temperatures (up to 110°C)
• does not turn yellow
• high adhesion and covering power
• can be applied on old alkyd coatings
• enhanced weather resistance
• time-constant gloss

Recommended uses:
The enamel is intended for decorative and protective painting of radiators and water-pipes, as well as primed metal. It can be applied on old alkyd coatings which are hard to remove. To be used for painting of wood and wooden materials, mineral foundations (concrete, plaster)

Application guidelines:
Surface preparation:

• The surface to be painted should be clean, dry, degreased and free of dust
• Remove peeling fragments off previously painted surfaces, clean from dust and dirt
• The surfaces covered with rust must be cleaned with a brush until clean metal appears and primed with anticorrosive primer

Dilution:
If necessary, dilute with water for working viscosity

Application guidelines:

• Thoroughly stir the enamel before applying
• Apply with a brush, roller or by spraying at temperature +5 °С and above
• Apply 1-2 enamel layers. The second layer is to be applied after the first one has dried
• Not to be applied on warmed radiators and pipes, as well as on non-ferrous metals!

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.