ANTISEPTIC GRUND for wood TRIORA
-
Drying time
2-4 hours at +18-22°С and 65% RH
-
Coverage
1L per 5–10 m²
-
Thinner
Water
-
Type of works
Interior, Exterior
-
Containers
0,75 L
-
Drying time
24 months
-
Colour scale
Transparent
Value of the product:
- Protects the surface from blue stain, mould and rot
- Slows down moisture penetration
- Penetrates deeply into wood texture
- Fast drying
Recommended uses:
Used for preliminary treatment of wooden walls, doors, fences, both treated with antiseptic and those not treated, preliminary treatment of log wood, sawn wood, as well as the wood impregnated by pressure, before applying lacquer, glaze or paint to protect the surface from rot, blue stain and mould
Application guidelines:
Surface preparation:
- The surface should be clean from dust, mould and foreign substances
- The treated surface must be dry, with less than 20% wood humidity
Dilution:
No dilution needed. May be diluted with water if necessary
Application guidelines:
- Thoroughly stir before applying
- Use a brush to apply the 1st
- Board end faces must be treated extremely carefully
- To enhance protection against blue stain, rot and mould, it is recommended to apply two layers of the primer on an unprocessed surface
- Apply with a brush or by spraying at temperature +10 °С and above
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.