Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Structural facade acrylic paint TRIORA

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      4-6 hours at a temperature +18-22°С and 65% RH

    • Coverage

      to 1,2 m²/kg

    • Thinner

      Water

    • Type of works

      Exterior, Facade

    • Containers

      5 kg, 15 kg

    • Drying time

      24 months

    • Brands

      TRIORA

The value of the product:

  • Weatherproof
  • Durable
  • Elastic – does not crack
  • Creates an expressive structure
  • High moisture resistance – contains wax

Purpose:
Using for creating protection and decoration of the surfaces with a high level of operational load on the facade and also inside the premises. The product could be used as a finishing layer in a thermal insulation system with the using of foam polystyrene boards. Creates a uniform rough surface. You can create decorative effects using a structural roller or other tools

The mode of application:
Surface preparation:

  • The surface must be clean, dry, strong and free from grease
  • The surfaces previously coated with chalk, glue, lime or silicone paints should be cleaned from these coating completely
  • If there is mold or fungus on the surface, they have to be removed with the help of BIO-protective agent TM TRIORA
  • The base must be prepared and the depressions more than 2 mm should not be
  • For priming crumbling, as well as intensively absorbent surfaces (aerated concrete, gypsum), it is better to use a Strengthening primer with the deep penetration by TM TRIORA

NECESSARILY: before the product applying use Quartz adhesive primer for putty TM TRIORA, tinted in the same tone with the paint

Method of application:

  • Before using, the paint must be mixed thoroughly. Could be applied undiluted or, if it is necessary, diluted with the water to get good viscosity (but not more than 1% of water)
  • Could be applied with the help of spatula or brush on the prepared surface, and then could be structured with the coarser roller

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

preloader