Промышленное предприятие ЗИП

Range of products

Показать фильтры товаров
Показать категории

Interior paint for walls and ceilings TRIORA

Download sanitary and hygienic conclusion Download technical card
Write expert
    • Drying time

      1-2 hours at +18-22°С and 65% RH

    • Coverage

      1 kg to 6-8 m²

    • Thinner

      Water

    • Type of works

      Interior

    • Glossiness

      Matte

    • Containers

      1,4 kg, 3,5 kg, 7 kg, 14 kg

    • Washing resistance

      Non-washing-resistant

    • Drying time

      24 months

The value of the product:

  • Snow-white forever
  • Velvety-matte texture
  • Steam-proof – the walls are “breathing”
  • Economical consumption
  • Easy to apply

Recommended uses:
Using for protective and decorative painting of the new and previously painted with water-soluble paints surfaces inside the dry premises, which do not require washing: concrete, plaster, cement-lime, asbestos cement, brick, plasterboard and other porous surfaces

The mode of application:
Surface preparation:

  • The surface must be clean, dry, strong and free from grease
  • The surfaces previously coated with chalk, glue, lime or silicone paints should be cleaned from these coating completely
  • The glossy surfaces must be filed down. If there is mold or fungus on the surface, they have to be removed with the help of BIO-protective agent TM TRIORA
  • For leveling the surface, use the Interior putty by TM TRIORA
  • For qualitative preparation and increasing the durability of the coating and for reducing the consumption of the paint, it is recommended to prime the surface with the help of Universal acrylic primer by TM TRIORA or Priming concentrate 1/5 by TM TRIORA
  • For priming crumbling, as well as intensively absorbent surfaces (aerated concrete, gypsum), it is better to use the Strengthening primer with the deep penetration by TM TRIORA

Method of application:

  • Before using, the paint must be mixed thoroughly
  • Could be applied undiluted or, if it is necessary, diluted with the water to get good viscosity (but not more than 5% of water)
  • Should be applied in two layers for better results. The second layer could be applied only after the total drying of the first one

Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.

Оur brands
Оur partners
закрыть

Fieldset

 

Verification

закрыть

Supplier Data

  • Section

 

preloader