Strengthen primer TR-23 strong TRIORA prof
-
Drying time
1 hour at +18-22°С and 65% RH
-
Coverage
1L per 5-10 m² for surfaces with high absorption; 1L per 8-16 m² for surfaces with normal absorption
-
Thinner
Water
-
Type of works
Inside and outside the permises
-
Containers
1 L, 5 L, 10 L
-
Drying time
24 months
The value of the product:
- Gives strength to a depth of 5 mm
- Reduces the possibilities of appearing “highs”
- Concentrated 1: 2
The appointment of the product:
Using to strengthen the fragile, porous, absorbent bases, as well as primary surface treatment
The mode of application:
Surface preparation:
- Before the starting of the works previous surface’s cover, which is unstable should be removed
- The surface must be dry, free from dirt, dust, grease stains and other substances that reduce adhesion of the surface
Application:
- Before using, the primer must be mixed thoroughly
- Could be applied to the surface with the help of brush, roller or with a sprayer at a temperature no lower than + 5 ° C. The second layer is possible to applying only after drying the first one
ATTENTION: avoid over-priming – the surface should not be glossy!
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.