Biosecurity agent TR-25 bio TRIORA prof
Save the link in your social network that would not lose.
Write expert
-
Drying time
4-12 hours at +18-22°С and 65% RH
-
Coverage
1L per 5 m²
-
Thinner
Water
-
Type of works
Inside and outside the permises
-
Containers
1 L, 5 L
-
Drying time
24 months
The value of the product:
- Mold and fungi removal
- Creating an obstacle to the microorganisms spreading on the surface
- Creating the vapor-permeable, “breathable” surfaces
- Does not contain the harmful compounds
The appointment of the product:
The biosecurity agent using for the prophylaxis and disinfection of the fungi, mold, mosses and algae before the finishing coat applying
The mode of application:
Preparation of the surface:
- The surface must be dry, free from dirt, dust and grease stains
- The surface contaminated by the microorganisms should be cleaned with a brush or scraper and rinse with water
Application:
- The product must be applied with the help of brush to the prepared dry surface with a thin even layer at a temperature of at least + 5 ° C and not higher than + 30° C
- The next treatment of the surface is possible only after the complete drying of the biosecurity agent
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.