Enamel for windows and doors TRIORA
-
Drying time
1-2 hour at +18-22°С and 65% RH
-
Coverage
1L per 7-10 m²
-
Thinner
Water
-
Type of works
Interior, Exterior
-
Glossiness
Semi-glossy
-
Containers
0,75 L, 2,5 L, 400 ml
-
Washing resistance
Washing-resistant
-
Drying time
24 months
-
Colour scale
White, Tinting in tinting studios
Value of the product:
- Does not turn yellow
- Can be applied onto alkyd surfaces
- Has “anti-blocking” effect — painted surfaces do not stick together
- Contains additives preventing mould and fungi emergence
- Weather-resistant, water-repellent
Recommended uses:
For exterior and interior painting of windows and doors. Accentuates wooden surface texture preserving natural beauty of the wood. To be applied on wood, fibreboard, chipboard, primed metal, mineral foundations. Good adhesion to wooden surfaces, as well as to surfaces previously painted with alkyd paints
Application guidelines:
Surface preparation:
- The surface to be painted should be clean, dry, degreased and free of dust. Remove peeling fragments off previously painted surfaces, clean from dust and dirt
- Before painting, treat new items made of wood and fibreboard with TRIORA «Nature Base» Wood-protective Primer or with TRIORA Acrylic Enamel for Windows and Doors diluted with water by 10%. The surface should be dry before painting
Dilution:
If necessary, dilute with water for working viscosity
Application guidelines:
- Thoroughly stir the enamel before applying
- Apply with a brush, roller or by spraying at temperature +5 °С and above
- Apply 1-2 enamel layers. The second layer is to be applied after the first one has dried
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.